Dokuz Eylül University Information Package / Courses Catalog

General Description

History

Dokuz Eylül University, Engineering Faculty, Metallurgical and Materials Engineering Department was established in 1997 as the first Metallurgical and Materials Engineering Department in the region by the Academicians of Construction and Manufacturing Division of Mechanical Engineering Department. Since its establishment, 15 laboratories have been set up by the projects supported by the State Planning Organization, TUBITAK and the University Scientific Research programs. In its first academic year of 1999-2000, 30 students were enrolled. The quota of formal education is increased to 73 and unchanged up to date. Formal education in the department is supported by 30% English. In addition to undergraduate education, MSc and PhD Programs of Metallurgical and Materials Engineering are also available in the Graduate School of Natural and Applied Sciences. Education language of MSc and PhD Programs is Turkish.

Qualification Awarded

Metallurgical and Materials Engineering, Bachelor's Degree (B.Sc)

Level of Qualification

First Cycle (Bachelor's Degree)

Specific Admission Requirements

High school diploma, placement through a nation-wide Student Selection Examination.

Specific Arrangements for Recognition of Prior Learning (Formal, Non-Formal and Informal)

The students who wish to transfer into Dokuz Eylul University from Universities in Turkey and foreign countries are accepted according to Regulations Concerning switching Between Bachelors Degree and Associate Level Programs, Double Major and Minor Programs and Interagency Credit Transfer in Higher Education and Conditions of Assessment determined by the University Senate related to the horizontal transitions. For those who wish to transfer to the Bachelor program of the department, from the related Vocational School and Open University programs, Regulations for transfer to Bachelor programs from Vocational Schools and Open University programs of Dokuz Eylul University applies.

Qualification Requirements and Regulations

Students must complete all the courses successfully in order to graduate from 4 year bachelor program. The degree is awarded to students who have successfully completed all the courses in the curriculum, 70 workdays practice, graduation-project, a minumum of 240 ECTS credits and a minimum Cumulative Grade Point Average (CGPA) of 2.00 / 4.00.

Profile of the Programme

The objectives of the Bachelor s degree program are to educate Metallurgy and Materials Engineers who are able to design, manufacture, characterize and perform applications in the field of Metallurgy and Materials Engineering, define engineering problems, design and select appropriate materials, products and processes and take part in research and development studies, apply energy, cost, environmental, occupational health and safety issues through innovative and sustainable approaches at every stage of the life cycle of a given material, access target information, use their knowledge correctly and have an awareness of the importance of lifelong learning, have universal, social and professional ethical values and an awareness of environmental protection, cooperate and work in teams, and communicate effectively orally and in writing. For this purpose, students are subjected to vocational courses such as Materials Science, Materials Characterization, Metallurgical Thermodynamics, Physical Metallurgy, Chemical Metallurgy, Foundry Technology as well as basic science courses and Social/Technical elective courses of Faculty. Students who are successful at undergraduate program may complete double Major Program in Mechanical, Mining, Textile, Computer and Geophysical Engineering Departments. Students of Mining, Mechanical and Textile Engineering departments may apply to minor program in our department whereas our students may enroll to minor program of Geophysical, Textile, Mining, Computer and Mechanical Engineering departments. A second engineering program diploma and a minor program certificate is issued to students who have completed double major and minor programs respectively. Educational status of the department is evaluated and accredited by Association for Evaluation and Accreditation of Engineering Programs (MÜDEK). Bologna Process (European Higher Education Area alignment studies) which provides easy circulation to the European Higher Education Area country citizens in Europe with the aim to get higher education or work in Europe has started in 2010. The objectives and outcomes of the Bachelors degree program which are determined in the framework of MUDEK are updated accordingly to the feedback of the associates of the department and the expectations of European Education area. Our University is eligible to receive Diploma Suplement Label in 2012 and ECTS Label in 2013. All our students who have graduated in order to cover our students who started their education in the 2005-2006 academic year and afterwards will receive a Diploma Supplement with their Diplomas free of charge. The department has four bilateral agreements within ERASMUS Students and Scholars Exchange Program by year 2014 and aims to increase the knowledge and experiences by supporting the exchange of students and academics through bilateral agreements with qualified institutions which has International reputation. The educational and research activities continue with academic staff consisting of 6 professors, 6 assistant professors, 1 lecturer and 8 research assistants, as of 2017. Metallurgical and Materials Engineering Department, serve to the public, industry and private sector organizations with qualified and experienced academic and technical staff, advanced laboratories and research facilities. In the Department, 15 laboratories (Mechanical Testing, Metalography, Characterization, Ceramic, Plastic Forming, Sample Preparation, Chemistry, Corrosion, Casting, Heat Treatment, X-Ray, Electronic Materials, Tribology, Simulationand advanced materials) operate in order to maintain educational and research activities.

Key Learning Outcomes

1	Ability to use acquired knowledge of mathematics, physics, chemistry and engineering principles in the field of Metallurgical and Materials Engineering (MME).
2	Ability to identify and analyze MME-related problems, and model, select and apply appropriate methods for finding solutions.
3	Ability to apply modern methods to design a MME-related system, process, device or product which meets the intended purpose under realistic constraints and conditions.
4	Ability to devise, select, and use modern techniques and tools needed for MME practice, and employ information technologies effectively
5	Ability to design and conduct experiments, gather data, analyze and interpret results for investigating MME related problems.
6	Ability work individually and perform efficiently in intra-disciplinary and multi-disciplinary teams
7	Ability to communicate effectively in Turkish and in at least one foreign language, both orally and in writing
8	Considering the necessities of the modern age, recognition of the need for lifelong learning; ability to access information, to follow developments in science and technology, and to continue to educate him/herself
9	Have an understanding of universal, social and professional ethical values and ability to take responsibility.
10	Knowledge about business life practices such as project management, risk management, and change management, awareness of information, entrepreneurship, innovation, and sustainable development
11	Ability to understand the effects of materials production and engineering activities on environment, health and safety, economy and social life, the contemporary issues and the legal consequences of engineering practices.
12	Have knowledge and ability to apply the processes and technologies used for the production, processing, protection and recycling of materials.

Occupational Profiles of Graduates with Examples

Graduates of the Department of Metallurgical and Materials Engineering can work as production, quality assurance and research and development engineers or as administrators in the the automotive, defence, petrochemical, aerospace, energy, and white appliances sectors, integrated metal production plants, rolling mills, foundries, heat treatment, powder metallurgy, forging industry plants, ceramics, polymers and composite materials production and manufacturing facilities. Also our graduates can serve as researchers or academics in various research centers at home and abroad.

Access to Further Studies

May apply to second cycle programmes.

Course Structure Diagram with Credits

Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
Academic plan of the department which is supported by 30% English, includes a total of 160 credit hours of classes composed of 144 hours of theoretical lectures and 32 hours of laboratory and applications. 16 courses in the curriculum is given in English. Academic Plan is composed of 48 compulsory and 8 elective courses. A total of 46 courses is included in the elective course pool of the department. In addition, faculty electives of 49 non-technical social courses and 35 technical courses are available. The required courses / elective courses ratio in the Curriculum is 208 / 32 ECTS. The students have to take 8 ECTS of elective courses from Faculty Elective Courses Plan. The course structure and associated credits are provided in the Educational Plan given below.
T: Theoretical P: Practice L: Laboratory B: Spring Semester G: Fall Semester H: Full Year
1 .Semester:
G	1	ATA 1001	PRINCIPLES OF ATATURK AND HISTORY OF THE TURKISH REVOLUTION I	REQUIRED	2	0	0	2
G	2	BIT 1003	BASIC INFORMATION TECHNOLOGIES	REQUIRED	1	1	0	3
G	3	FİZ 1101	PHYSICS I	REQUIRED	3	2	0	5
G	4	MAK 1011	TECHNICAL DRAWING	REQUIRED	4	0	0	4
G	5	MAK 1021	WORKSHOP TRAINING (4 WEEK)	REQUIRED	3	3	0	2
G	6	MAT 1009	CALCULUS I	REQUIRED	4	0	0	4
G	7	MME 1107	TECHNICAL ENGLISH I	REQUIRED	3	0	0	4
G	8	MME 1111	INTRODUCTION TO MATERIALS ENGINEERING	REQUIRED	2	0	0	4
G	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	2
TOTAL:								30

1 .Semester: Elective Course
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
G	1	BDE 1003	PHYSICAL EDUCATION	ELECTIVE	2	0	0	2
G	2	GSH 1003	FOLK DANCING	ELECTIVE	2	0	0	2
G	3	GSM 1003	MUSIC	ELECTIVE	2	0	0	2

2. Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
B	1	ATA 1002	PRINCIPLES OF ATATURK AND HISTORY OF THE TURKISH REVOLUTION II	REQUIRED	2	0	0	2
B	2	CME 1202	COMPUTER PROGRAMMING	REQUIRED	2	2	0	4
B	3	FİZ 1102	PHYSICS II	REQUIRED	3	2	0	5
B	4	HUK 4057	BUSINESS LAW	REQUIRED	2	0	0	3
B	5	KİM 1015	CHEMISTRY	REQUIRED	3	2	0	5
B	6	MAT 1010	CALCULUS II	REQUIRED	4	0	0	4
B	7	MME 1218	TECHNICAL ENGLISH II	REQUIRED	4	0	0	4
B	8	STA 1302	STATISTICS	REQUIRED	2	0	0	3
B	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	0
TOTAL:								30

3 .Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
G	1	KİM 2013	PHYSICAL CHEMISTRY	REQUIRED	3	0	0	4
G	2	MAK 2325	ENGINEERING MECHANICS	REQUIRED	4	0	0	5
G	3	MAT 2011	CALCULUS III	REQUIRED	4	0	0	4
G	4	MME 2001	MATERIALS SCIENCE I	REQUIRED	3	0	0	5
G	5	MME 2003	METALLURGICAL THERMODYNAMICS	REQUIRED	3	0	0	4
G	6	MMM 2500	PRACTICE I	SUMMER TRAINING	0	0	0	3
G	7	TDL 1001	TURKISH LANGUAGE I	REQUIRED	2	0	0	2
G	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	3
TOTAL:								30

3 .Semester: Elective Course
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
G	1	ESE 2067	BUSINESS MANAGEMENT AND MANAGEMENT	SOCIAL ELECTIVE	2	0	0	3
G	2	ESE 2069	PERSONAL STYLE AND IMAGE MANAGEMENT	SOCIAL ELECTIVE	2	0	0	3
G	3	MSİ 2067	BUSINESS MANAGEMENT AND MANAGEMENT	SOCIAL ELECTIVE	2	0	0	2
G	4	MSİ 2069	PERSONAL STYLE AND IMAGE MANAGEMENT	SOCIAL ELECTIVE	2	0	0	2

4. Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
B	1	MME 2004	THERMODYNAMICS OF SOLUTIONS	REQUIRED	3	0	0	5
B	2	MME 2408	MATERIALS CHARACTERIZATION	REQUIRED	3	2	0	6
B	3	MMM 2402	MATERIALS SCIENCE II	REQUIRED	3	0	0	5
B	4	MMM 2414	ENGINEERING MATHEMATICS	REQUIRED	3	0	0	5
B	5	MMM 2416	TRANSPORT PHENOMENA	REQUIRED	3	0	0	5
B	6	TDL 1002	TURKISH LANGUAGE II	REQUIRED	2	0	0	2
B	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	2
TOTAL:								30

5 .Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
G	1	İSG 4001	OCCUPATIONAL HEALTH AND SAFETY I	REQUIRED	2	0	0	2
G	2	MME 3515	PHASE DIAGRAMS	REQUIRED	3	0	0	5
G	3	MMM 3003	MATERIALS LABORATORY	REQUIRED	1	4	0	6
G	4	MMM 3013	CHEMICAL METALLURGY	REQUIRED	3	0	0	5
G	5	MMM 3502	PRACTICE II	SUMMER TRAINING	0	0	0	4
G	6	MMM 3505	PHYSICAL METALLURGY	REQUIRED	3	0	0	5
G	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	3
TOTAL:								30

6. Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
B	1	MME 3006	MATERIAL AND ENERGY BALANCE	REQUIRED	3	0	0	5
B	2	MMM 3002	PLASTIC FORMING	REQUIRED	3	0	0	4
B	3	MMM 3008	FOUNDRY TECHNOLOGY	REQUIRED	3	0	0	5
B	4	MMM 3012	HEAT TREATMENTS	REQUIRED	2	2	0	6
B	5	MMM 3014	CERAMIC MATERIALS	REQUIRED	2	2	0	6
B	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	4
TOTAL:								30

6 .Semester: Elective Course
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
B	1	ETE 3034	FINANCIAL MANAGEMENT FOR ENGINEERS	TECHNICAL ELECTIVE	2	0	0	4
B	2	ETE 3035	ELEMENTAL & ISOTOPIC ANALYSIS IN THE MULTIDISCIPLINARY FIELDS	TECHNICAL ELECTIVE	2	0	0	4
B	3	MMM 4025	PRODUCTION OF IRON AND STEEL	ELECTIVE	3	0	0	4
B	4	MMM 4028	NONFERROUS EXTRACTIVE METALLURGY	ELECTIVE	3	0	0	4
B	5	MTS 3034	FINANCIAL MANAGEMENT FOR ENGINEERS	TECHNICAL ELECTIVE	2	0	0	3
B	6	MTS 3035	ELEMENTAL & ISOTOPIC ANALYSIS IN THE MULTIDISCIPLINARY FIELDS	TECHNICAL ELECTIVE	2	0	0	3

7 .Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
G	1	END 3604	ENGINEERING ECONOMICS	REQUIRED	3	0	0	4
G	2	MME 4713	POLYMERS	REQUIRED	3	0	0	5
G	3	MMM 4709	PRE- GRADUATION PROJECT	REQUIRED	0	2	0	6
G	4	MMM 4711	DESING AND MATERIAL SELECTION	REQUIRED	2	2	0	7
G	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	8
TOTAL:								30

7 .Semester: Elective Course
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
G	1	MME 4023	NONDESTRUCTIVE CONTROL	ELECTIVE	3	0	0	4
G	2	MME 4043	MELTING AND SOLIDIFICATION	ELECTIVE	3	0	0	4
G	3	MME 4045	METALLIC MATERIALS	ELECTIVE	3	0	0	4
G	4	MME 4047	NANOMATERIALS	ELECTIVE	3	0	0	4
G	5	MME 4049	CORROSION	ELECTIVE	2	2	0	4
G	6	MME 4051	FAILURE SCIENCE	ELECTIVE	3	0	0	4
G	7	MMM 4019	DESIGN OF STEELS	ELECTIVE	3	0	0	4
G	8	MMM 4021	WELDING METALLURGY	ELECTIVE	3	0	0	4
G	9	MMM 4023	NONDESTRUCTIVE CONTROL	ELECTIVE	3	0	0	4
G	10	MMM 4029	METALLURGICAL PRETREATMENTS	ELECTIVE	3	0	0	4
G	11	MMM 4031	HYDROMETALLURGY	ELECTIVE	3	0	0	4
G	12	MMM 4033	METALLURGICAL TECHNOLOGIES I	ELECTIVE	3	0	0	4
G	13	MMM 4035	METALLURGICAL TECHNOLOGIES III	ELECTIVE	3	0	0	4
G	14	MMM 4037	AMORPHOUS MATERIALS	ELECTIVE	3	0	0	4
G	15	MMM 4039	STRUCTURAL CERAMICS	ELECTIVE	3	0	0	4
G	16	MMM 4041	GLASS TECHNOLOGY	ELECTIVE	3	0	0	4
G	17	MMM 4043	MELTING AND SOLIDIFICATION	ELECTIVE	3	0	0	4
G	18	MMM 4045	METALLIC MATERIALS	ELECTIVE	3	0	0	4
G	19	MMM 4047	NANOMATERIALS	ELECTIVE	3	0	0	4
G	20	MMM 4051	FAILURE SCIENCE	ELECTIVE	3	0	0	4

8. Semester:
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
B	1	END 4822	QUALITY CONTROL	REQUIRED	3	0	0	4
B	2	İSG 4002	OCCUPATIONAL HEALTH AND SAFETY	REQUIRED	2	0	0	2
B	3	MMM 4898	GRADUATION PROJECT	SENIOR PROJECT	0	6	0	12
B	0	-	ELECTIVE COURSE	ELECTIVE	-	-	-	12
TOTAL:								30

8 .Semester: Elective Course
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
B	1	MAK 4102	MACHINE ELEMENTS	ELECTIVE	3	0	0	4
B	2	MME 4018	SURFACE TREATMENTS	ELECTIVE	3	0	0	4
B	3	MME 4020	TECHNOLOGY OF COMPOSITE MATERIALS	ELECTIVE	3	0	0	4
B	4	MME 4024	TRIBOLOGY	ELECTIVE	3	0	0	4
B	5	MME 4036	ELECTRONIC MATERIALS	ELECTIVE	3	0	0	4
B	6	MME 4040	ELECTRONIC AND MAGNETIC CERAMICS	ELECTIVE	3	0	0	4
B	7	MME 4044	POLYMER APPLICATIONS	ELECTIVE	3	0	0	4
B	8	MME 4050	MATERIALS AND THE ENVIRONMENT	ELECTIVE	3	0	0	4
B	9	MMM 4018	SURFACE TREATMENTS	ELECTIVE	3	0	0	4
B	10	MMM 4020	TECHNOLOGY OF COMPOSITE MATERIALS	ELECTIVE	3	0	0	4
B	11	MMM 4022	POWDER METALLURGY	ELECTIVE	3	0	0	4
B	12	MMM 4024	TRIBOLOGY	ELECTIVE	3	0	0	4
B	13	MMM 4026	FURNACES AND REFRACTORIES	ELECTIVE	3	0	0	4
B	14	MMM 4030	ELECTROMETALLURGY	ELECTIVE	3	0	0	4
B	15	MMM 4032	CRYSTALLOGRAPHY	ELECTIVE	3	0	0	4
B	16	MMM 4034	METALLURGICAL TECHNOLOGIES II	ELECTIVE	3	0	0	4
B	17	MMM 4036	ELECTRONIC MATERIALS	ELECTIVE	2	2	0	4
B	18	MMM 4038	BEHAVIOUR OF MATERIALS AT HIGH TEMPERATURE	ELECTIVE	3	0	0	4
B	19	MMM 4040	ELECTRONIC AND MAGNETIC CERAMICS	ELECTIVE	3	0	0	4
B	20	MMM 4042	CERAMIC SUPERCONDUCTORS	ELECTIVE	3	0	0	4
B	21	MMM 4044	POLYMER APPLICATIONS	ELECTIVE	3	0	0	4
B	22	MMM 4046	BIOCERAMICS	ELECTIVE	3	0	0	4
B	23	MMM 4048	CASTING DESIGN	ELECTIVE	2	2	0	4
B	24	MMM 4050	MATERIALS AND THE ENVIRONMENT	ELECTIVE	3	0	0	4


FLEXIBLE ELECTIVE COURSE ACCORDING TO ECTS
Semester	No	Course Unit Code	Course Unit Title	Course Unit Type	T	P	L	ECTS
H	1	ESE 2013	ENGINEERING ETHICS	SOCIAL ELECTIVE	2	0	0	3
H	2	ESE 2014	EFFECTIVE COMMUNICATION IN ENGINEERING	SOCIAL ELECTIVE	2	0	0	3
H	3	ESE 2015	FRENCH FOR ENGINEERS	SOCIAL ELECTIVE	2	0	0	3
H	4	ESE 2016	ENVIROMENTAL POLLUTION & ITS CONTROL	SOCIAL ELECTIVE	2	0	0	3
H	5	ESE 2024	NATURE, ENVIRONMENT AND URBANIZATION	SOCIAL ELECTIVE	2	0	0	3
H	6	ESE 2050	INTELLECTUAL PROPERTY RIGHTS	SOCIAL ELECTIVE	2	0	0	3
H	7	ESE 2059	DISASTERS ADMINISTRATION	SOCIAL ELECTIVE	2	0	0	3
H	8	ESE 2060	BASIC JAPANESE	SOCIAL ELECTIVE	2	0	0	3
H	9	ESE 2065	CAREER PLANNING AND DEVELOPMENT	SOCIAL ELECTIVE	2	0	0	3
H	10	ESE 2066	OCCUPATIONAL HEALTH DISEASES IN ENGINEERING	SOCIAL ELECTIVE	2	0	0	3
H	11	MSİ 2001	PRESENTATION AND TECHNIQUES OF PRESENTATION	SOCIAL ELECTIVE	2	0	0	2
H	12	MSİ 2002	INTRODUCTION TO PHILOSOPHY	SOCIAL ELECTIVE	2	0	0	2
H	13	MSİ 2004	HUMAN RELATIONSHIPS	SOCIAL ELECTIVE	2	0	0	2
H	14	MSİ 2005	PERSONAL DEVELOPMENT AND ITS CONTROL	SOCIAL ELECTIVE	2	0	0	2
H	15	MSİ 2006	BRIDGE	SOCIAL ELECTIVE	2	0	0	2
H	16	MSİ 2008	ECONOMIC GLOBALIZATION	SOCIAL ELECTIVE	2	0	0	2
H	17	MSİ 2009	SOCIAL POLITICS IN EUROPEAN UNION	SOCIAL ELECTIVE	2	0	0	2
H	18	MSİ 2010	BUSINESS SAFETY	SOCIAL ELECTIVE	2	0	0	2
H	19	MSİ 2012	YOUNG ENTREPRENEURSHIP	SOCIAL ELECTIVE	2	0	0	2
H	20	MSİ 2013	ENGINEERING ETHICS	SOCIAL ELECTIVE	2	0	0	2
H	21	MSİ 2015	FRENCH FOR ENGINEERS	SOCIAL ELECTIVE	2	0	0	2
H	22	MSİ 2016	ENVIRONMENTAL POLLUTION AND ITS CONTROL	SOCIAL ELECTIVE	2	0	0	2
H	23	MSİ 2022	MIMAR SINAN	SOCIAL ELECTIVE	2	0	0	2
H	24	MSİ 2024	NATURE, ENVIRONMENT AND URBANIZATION	SOCIAL ELECTIVE	2	0	0	2
H	25	MSİ 2026	INTEGRATED ENVIRONMENTAL POLITICS IN EUROPEAN UNION AND EUROPEAN COUNCIL	SOCIAL ELECTIVE	2	0	0	2
H	26	MSİ 2027	INTRODUCTION TO PSYCHOLOGY	SOCIAL ELECTIVE	2	0	0	2
H	27	MSİ 2029	COMMUNICAITON SKILLS	SOCIAL ELECTIVE	2	0	0	2
H	28	MSİ 2030	PUBLIC RELATIONS	SOCIAL ELECTIVE	2	0	0	2
H	29	MSİ 2031	HUMAN RESOURCES MANAGEMENT	SOCIAL ELECTIVE	2	0	0	2
H	30	MSİ 2032	SOCIAL PSYCHOLOGY	SOCIAL ELECTIVE	2	0	0	2
H	31	MSİ 2041	INTEGRATED COASTAL MANAGEMENT, PORT MANAGEMENT AND INTERSTATE PROGRAMS IN TURKEY	SOCIAL ELECTIVE	2	0	0	2
H	32	MSİ 2043	LABOUR LAW AND APPLICATIONS	SOCIAL ELECTIVE	2	0	0	2
H	33	MSİ 2044	ANATOLIAN CIVILIZATIONS IN THE MIDDLE AGES	SOCIAL ELECTIVE	2	0	0	2
H	34	MSİ 2048	GEO. HARRIT. GEOTUR. AND GEOPARK POT. OF TURKEY	SOCIAL ELECTIVE	2	0	0	2
H	35	MSİ 2049	NATURAL DISASTERS	SOCIAL ELECTIVE	2	0	0	2
H	36	MSİ 2050	INTELLECTUAL PROPERTY RIGHTS	SOCIAL ELECTIVE	2	0	0	2
H	37	MSİ 2054	SOCIAL POLITICS	SOCIAL ELECTIVE	2	0	0	2
H	38	MSİ 2059	DISASTERS ADMINISTRATION	SOCIAL ELECTIVE	2	0	0	2
H	39	MSİ 2060	BASIC JAPANESE	SOCIAL ELECTIVE	2	0	0	2
H	40	MSİ 2061	INTERNAL AUDITING IN COMPANIES	SOCIAL ELECTIVE	2	0	0	2
H	41	MSİ 2062	ADMINISTRATIVE STRATEGIC PLANNING	SOCIAL ELECTIVE	2	0	0	2
H	42	MSİ 2063	PRINCIPLES OF MARKETING	SOCIAL ELECTIVE	2	0	0	2
H	43	MSİ 2064	CHESS	SOCIAL ELECTIVE	2	0	0	2
H	44	MSİ 2065	CAREER PLANNING AND DEVELOPMENT	SOCIAL ELECTIVE	2	0	0	2
H	45	MSİ 2066	OCCUPATIONAL HEALTH DISEASES IN ENGINEERING	SOCIAL ELECTIVE	2	0	0	2
H	1	ETE 3005	METHODS OF ARTIFICAL INTELLIGENCE	TECHNICAL ELECTIVE	2	0	0	4
H	2	ETE 3006	BIOMEDICAL SYSTEMS	TECHNICAL ELECTIVE	2	0	0	4
H	3	ETE 3014	GIS FOR ENGINEERS	TECHNICAL ELECTIVE	2	0	0	4
H	4	ETE 3018	MODERN ENGINEERING MATHEMATICS	TECHNICAL ELECTIVE	2	0	0	4
H	5	ETE 3025	PROJECT MANAGEMENT	TECHNICAL ELECTIVE	2	0	0	4
H	6	ETE 3029	QUALITY MANAGEMENT	TECHNICAL ELECTIVE	2	0	0	4
H	7	ETE 3032	PERFORMANCE MEASUREMENT IN BUSINESSES	TECHNICAL ELECTIVE	2	0	0	4
H	8	MTS 3001	BIOTECHNOLOGY	TECHNICAL ELECTIVE	2	0	0	3
H	9	MTS 3002	SELECTIVE TOPICS IN EARTHQUAKE ENGINEERING	TECHNICAL ELECTIVE	2	0	0	3
H	10	MTS 3004	ARCHAEOLOGICAL PROSPECTION	TECHNICAL ELECTIVE	2	0	0	3
H	11	MTS 3007	FUNDAMENTALS ROBOTICS	TECHNICAL ELECTIVE	2	0	0	3
H	12	MTS 3009	MULTIDICIP. JOINT PROJ. DEV. ON ENV. PROT	TECHNICAL ELECTIVE	2	0	0	3
H	13	MTS 3010	ENVIRONMENTAL EFFECTS OF MINING ACTIVITIES	TECHNICAL ELECTIVE	2	0	0	3
H	14	MTS 3012	TECHNICAL TEXTILES II	TECHNICAL ELECTIVE	2	0	0	3
H	15	MTS 3014	GIS FOR ENGINEERS	TECHNICAL ELECTIVE	2	0	0	3
H	16	MTS 3015	NEW DEVELOPMENTS IN ROAD TECHNOLOGY	TECHNICAL ELECTIVE	2	0	0	3
H	17	MTS 3016	INTRODUCTION TO TRANSPORTATION SYSTEMS ANALYSIS	TECHNICAL ELECTIVE	2	0	0	3
H	18	MTS 3017	PHYSICAL MODELS	TECHNICAL ELECTIVE	2	0	0	3
H	19	MTS 3019	APPROACHES TO PROBLEM SOLVING IN PRODUCTION	TECHNICAL ELECTIVE	2	0	0	3
H	20	MTS 3020	ENERGY AND ENVIRONMENT	TECHNICAL ELECTIVE	2	0	0	3
H	21	MTS 3021	APPLICATIONS OF ROCK MECHANICS AND NUMERICAL MODELING IN ENGINEERING PROJECTS	TECHNICAL ELECTIVE	2	0	0	3
H	22	MTS 3022	TUNNELING	TECHNICAL ELECTIVE	2	0	0	3
H	23	MTS 3023	GEOPHYSICAL METHODS IN MINE EXPLORATION	TECHNICAL ELECTIVE	2	0	0	3
H	24	MTS 3024	GEOLOGIC PROBLEMS AND GEOPHYSICAL SOLUTIONS	TECHNICAL ELECTIVE	2	0	0	3
H	25	MTS 3025	PROJECT MANAGEMENT	TECHNICAL ELECTIVE	2	0	0	3
H	26	MTS 3026	COMPUTER AIDED DESIGN IN EARTH SCIENCES	TECHNICAL ELECTIVE	2	0	0	3
H	27	MTS 3027	DRILLING TECHNOLOGY AND APPLICATIONS	TECHNICAL ELECTIVE	2	0	0	3
H	28	MTS 3028	MAP INFORMATION IN ENGINEERING	TECHNICAL ELECTIVE	2	0	0	3
H	29	MTS 3029	QUALITY MANAGEMENT	TECHNICAL ELECTIVE	2	0	0	3
H	30	MTS 3032	PERFORMANCE MEASUREMENT IN BUSINESSES	TECHNICAL ELECTIVE	2	0	0	3
H	31	MTS 3033	FOREING TRADE TRANSACTIONS	TECHNICAL ELECTIVE	2	0	0	3

Examination Regulations, Assessment and Grading

Related articles of Dokuz Eylul University Regulations of Education-Training and examination for associate and Bachelor Degree (http://www.deu.edu.tr/DEUWeb/Icerik/Icerik.php KOD=5683) and Engineering Faculty Practice of Education and Examination Rules (http://eng.deu.edu.tr/index.php/tr/oeretim-ve-snav-uygulama-esaslarhhhhhfgf) are applied concerning examinations and course achievement scores. Graduation grade for courses in the department is CC. Evaluation and assessment methods for each course are defined in the Course Description Form prepared by the lecturer / faculty members and information is included in the package.

Graduation Requirements

Students must successfully complete all the courses in order to graduate from this four-year Bachelors degree program. This degree is awarded to students who have succeeded in all courses in the program, completed 14 weeks (70 working days) practice, graduation project and provide a minimum of 240 ECTS credit with overall grade point average of at least 2.00 / 4.00.

Mode of Study (Full-Time, Part-Time, E-Learning )

Full-time

Programme Director or Equivalent

Prof. Dr. Ümit CÖCEN
Dokuz Eylul University
Department of Metallurgical and Materials Engineering
Tinaztepe Campus, Buca, 35390, İzmir TÜRKİYE
Phone : + 90-232-301 7458
Fax: +90-232-301 7452
E-mail: umit.cocen@deu.edu.tr

Bölüm Lisans Bologna Koordinatörü:
Assist. Prof. Dr. Isil BIRLIK
Dokuz Eylul University
Department of Metallurgical and Materials Engineering
Tinaztepe Campus, Buca, 35390, İzmir TÜRKİYE
Phone : + 90-232-301 7487
Fax: +90-232-301 7452
E-mail: isil.kayatekin@deu.edu.tr

DEGREE PROGRAMMES